dispatcherStandard-dep This modules implements a dispatcher for destination addresses. It computes hashes over parts of the request and selects an address from a destination set. The selected address is used then as outbound proxy. The module can be used as a statelessi load balancer, having no guarantee of fair distribution. Daniel-Constantin Mierla Copyright © 2004 FhG FOKUS
This modules implements a dispatcher for destination addresses. It computes hashes over parts of the request and selects an address from a destination set. The selected address is used then as outbound proxy. The module can be used as a statelessi load balancer, having no guarantee of fair distribution. Path to the file with destination sets. Default value is "/etc/seri/dispatcher.list" or "/usr/local/etc/ser/dispatcher.list". If set to 1, force overwriting of destination address when that is already set. Default value is "0". Various flags that affect the hashing behaviour. For now only the flag 1 and 2 are defined. If flag 1 is set only the username part of the uri will be used when computing an uri based hash. If flag 2 is set the username part of the uri will be used and if no username part is present the hostname part will be used. If no flags are set the username, hostname and port will be used The port is used only if different from 5060 (normal sip uri) or 5061 (in the sips case). Default value is "0". The method selects a destination from addresses set. Meaning of the parameters is as follows:
Example 5. Destination List File Each destination point must be on one line. First token is the set id and next is destination address. The set id must be an integer value. Destination address must be a valid SIP URI. Empty lines or lines starting with "#" are ignored. # $Id: dispatcher.list,v 1.1 2004/08/10 16:51:36 dcm Exp $ # dispatcher destination sets # # proxies 2 sip:127.0.0.1:5080 2 sip:127.0.0.1:5082 # gateways 1 sip:127.0.0.1:7070 1 sip:127.0.0.1:7072 1 sip:127.0.0.1:7074 Example 6. SERi Configuration File # $Id: dispatcher.cfg,v 1.1 2004/08/10 16:51:36 dcm Exp $ # sample config file for dispatcher module # debug=9 # debug level (cmd line: -dddddddddd) forki=no log_stderror=yes # (cmd line: -E) children=2 check_via=no # (cmd. line: -v) dns=off # (cmd. line: -r) rev_dns=off # (cmd. line: -R) port=5060 # for more info: sip_router -h # ------------------ module loading ---------------------------------- loadmodule "../sip_router/modules/maxfwd/maxfwd.so" loadmodule "../sip_router/modules/sl/sl.so" # loadmodule "../sip_router/modules/tm/tm.so" loadmodule "../sip_router/modules/dispatcher/dispatcher.so" # ----------------- setting module-specific parameters --------------- # -- dispatcher params -- modparam("dispatcher", "list_file", "../etc/dispatcher.list") # modparam("dispatcher", "force_dst", 1) route{ if ( !mf_process_maxfwd_header("10") ) { sl_send_reply("483","To Many Hops"); drop(); }; ds_select_dst("2", "0"); forward(uri:host, uri:port); # t_relay(); } |
Navigation |
||||